PDFDOC.RU :: Technical documentation | Info | Data Sheet   
 Example: transformeren ru

Home > Mechanical Components > Bearings and Seals > Ball Bearings > Double Row Self-Aligning > Radial self-align ball bearing,10mm ID

Radial self-align ball bearing,10mm ID. Part № 2200 E-2RS1TN9. Manufactured by SKF

Documents available:
Data Sheet 2200 E-2RS1TN9 Data Sheet
Data Sheet Dimension drawing data sheet
Manufacturer SKF
Static Load Rating 1.18kN
Dynamic Load Rating 5.53kN
Bearing Reference 2200 E-2RS1TN9
Maximum Speed - Grease 17000rpm
Race Width W 14mm
Limiting Speed 17000rpm
Load Ratings Dynamic 5530N
Load Ratings Static 1180N
Outside Race Diameter D 30mm
Bore Type Parallel
Inside Diameter d 10mm
Number Of Rows 2
Self Aligning Yes
Outside Diameter 30mm
Cage Material Fibreglass Reinforced PA
Race Width 14mm
End Type Sealed
Ball Bearing Type Self Aligning
Race Type Plain
Inside Diameter 10mm
Manufacturer SKF  Static Load Rating 1.18kN  Dynamic Load Rating 5.53kN  Bearing Reference 2200 E-2RS1TN9  Maximum Speed - Grease 17000rpm  Race Width W 14mm  Limiting Speed 17000rpm  Load Ratings Dynamic 5530N  Load Ratings Static 1180N  Outside Race Diameter D 30mm  Bore Type Parallel  Inside Diameter d 10mm  Number Of Rows 2  Self Aligning Yes  Outside Diameter 30mm  Cage Material Fibreglass Reinforced PA  Race Width 14mm  End Type Sealed  Ball Bearing Type Self Aligning  Race Type Plain  Inside Diameter 10mm 
RS Components UK Radial self-align ball bearing,10mm ID
Product Information:

Double Row Self - Aligning

Radial Self-Aligning Ball Bearing

These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).

Open Bearings

ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.

Sealed bearings

2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.
TN suffix denotes polyamide cage

Supplied with

instruction leaflet.

Double Row Self-Aligning

Manufactured by SKF

Radial self-align ball bearing,10mm ID. Part № 2200 E-2RS1TN9. Manufactured by SKF